Home > bästa produkter ka bar
ka bar: bästa produkter
![Ka-Bar Dessert Destroyer Ice Cream Scoop]()
Ka-Bar Dessert Destroyer Ice Cream Scoop
378 SEK
Ge dessertserveringen en taktisk känsla med den här glasskopan från KA-BAR med handtag inspirerat av KA-BARs klassiska stridskniv. Fungerar även utmärkt för melon och annan dessertfrukt. Kan diskas i diskmaskin.
![Ka-Bar Kortlek]()
Ka-Bar Kortlek
178 SEK
Whittle away the hours playing cards with your new favorite deck from KA-BAR. 2018 marks our 120th Anniversary and we've adorned these textured cards with a special logo that commemorates the big event. Face cards are custom-designed with old-timey characters imagined from earlier times, including the wiley bear and the fierce hunter from which we derived our name. Made in the USA.
![Ka-Bar Belt Clip]()
Ka-Bar Belt Clip
248 SEK
Reversible black metal belt clip fits most TDI and TDI/Hinderer fixed-blade knives. Sold with fasteners for mounting. The belt clip also fits the Becker Necker BK11 and the Becker/ESEE ESKABAR BK14. Does not fit the TDI 1493, 1494, 1480SF, 1478BP, and 2491 Fits maximum belt height of 4,44 cm, width of 3,17 cm and thickness of 0,63 cm Use T6 Torx Wrench to change fasteners
![Ka-Bar Tactical Spork/Kniv (Färg: Svart)]()
Ka-Bar Tactical Spork/Kniv (Färg: Svart)
218 SEK
The Tactical Spork, which is made from food and water approved Grilamid, is equipped with a fork/spoon combo and has a 64mm plastic serrated knife in the handle. The knife is accessed by pulling the spork in opposite directions from each extreme end. Hint--avoid gripping the flat panel area in the middle of the Spork--this is actually part of its lock. The tighter you hold here, the more difficult it will be for you to pull out the knife! The Tactical Spork is 175mm overall and has a blade length of 64mm. It weighs 46 g. Made in the USA.
![Ka-Bar Tactical Spork/Kniv (Färg: Grön)]()
Ka-Bar Tactical Spork/Kniv (Färg: Grön)
218 SEK
The Tactical Spork, which is made from food and water approved Grilamid, is equipped with a fork/spoon combo and has a 64mm plastic serrated knife in the handle. The knife is accessed by pulling the spork in opposite directions from each extreme end. Hint--avoid gripping the flat panel area in the middle of the Spork--this is actually part of its lock. The tighter you hold here, the more difficult it will be for you to pull out the knife! The Tactical Spork is 175mm overall and has a blade length of 64mm. It weighs 46 g. Made in the USA.
![Ka-Bar Tactical Spork/Kniv (Färg: Brun)]()
Ka-Bar Tactical Spork/Kniv (Färg: Brun)
218 SEK
The Tactical Spork, which is made from food and water approved Grilamid, is equipped with a fork/spoon combo and has a 64mm plastic serrated knife in the handle. The knife is accessed by pulling the spork in opposite directions from each extreme end. Hint--avoid gripping the flat panel area in the middle of the Spork--this is actually part of its lock. The tighter you hold here, the more difficult it will be for you to pull out the knife! The Tactical Spork is 175mm overall and has a blade length of 64mm. It weighs 46 g. Made in the USA.
![Ka-Bar Krunch Spoon/Straw]()
Ka-Bar Krunch Spoon/Straw
188 SEK
Ka-Bar Krunch Spoon/Straw är det ultimata verktyget för att äta soppa eller liknande. Förutom att aggera som sked så är Ka-Bar Krunch Spoon/Straw designad för att fungera som ett sugrör. Består av giftfri Creamid Klarar maskindisk Tillverad i USA
![Ka-Bar Ek Commando Presentation Knife]()
Ka-Bar Ek Commando Presentation Knife
4495 SEK
This beauty is decked out and ready to be put on display. A mirror polished stainless steel blade and lacquered walnut* handle scales make this knife a real head turner. But don't be fooled - this pretty lady is ready to dive into work as well! *Walnut is a natural material and there will be variation in grain and color of the handle scales used to make the EK13 Presentation Knives. Made in the USA. Sold with an American made leather sheath. WEIGHT 250 g BLADE LENGTH 168mm OVERALL LENGTH 321mm EDGE ANGLES 20 Degrees SHAPE Double-edged Spear Point TANG STAMP KA-BAR/Ek Commando Knife Co KNIFE MATERIAL 440C Stainless Steel GRIND Flat HANDLE MATERIAL Walnut ROCKWELL HARDNESS 55-58 BUTT CAP/GUARD Copper Coated Stainless Steel KNIFE COUNTRY OF ORIGIN United States SHEATH COUNTRY OF ORIGIN United States BLADE THICKNESS 3.91mm BLADE WIDTH 23.82mm
![Ka-Bar TDI Flipper Folder]()
Ka-Bar TDI Flipper Folder
1245 SEK
Ka-Bar TDI Flipper Folder En taktisk och mångsidig fällkniv, perfekt för EDC (Everyday Carry). Ka-Bar TDI Flipper Folder är tillbaka, bättre än någonsin, och kombinerar snabb enhandsöppning, robust konstruktion och en taktisk design. Den 3-tums bladet i AUS 8A rostfritt stål har en Spear Point-form, vilket ger en balans mellan styrka och precision. Med Crossbar-låsning för extra säkerhet och en ambidextrös design med reversibelt fickclip, passar den både höger- och vänsterhänta användare. Egenskaper: AUS 8A-blad – slitstarkt, korrosionsbeständigt och lätt att slipa Spear Point-bladdesign – utmärkt balans mellan styrka och precision Crossbar-lås – säker och stabil låsning Snabb flipper-öppning för enhandsanvändning Ergonomiskt GFN-handtag (Glass Filled Nylon) – lätt men extremt tåligt Tip-up bärstil med reversibelt fickclip – passar både höger- och vänsterhänta Lätt och kompakt – perfekt för dagligt bruk En slitstark och taktisk fällkniv, perfekt för EDC, självförsvar och taktisk användning – liten i storlek, stor i prestanda!
![Ka-Bar Skeleton Knife]()
Ka-Bar Skeleton Knife
298 SEK
The KA-BAR Skeleton Knife is a no-nonsense, lightweight knife that can be worn as a neck knife or in a pocket or pack. Made of stainless steel, the KA-BAR Skeleton is 156mm long and features a 64mm blade. Comes with a hard plastic sheath and KA-BAR's limited lifetime warranty. Fits perfectly in CRKT Mossback if you want to add a leather sheath. Weight 46 gram Steel 5Cr15 SS Blade length 64mm Overall length 156mm Grind Hollow Edge Angles 18 Degrees Handle Material 5Cr15 SS Shape Clip HRC 57-59 Stamp KA-BAR Made in China Blade Thickness 3.17mm
![Ka-Bar Lunch Pal]()
Ka-Bar Lunch Pal
258 SEK
Ka-Bar Lunch Pal Ät var du vill och när du vill med Ka-Bar Lunch Pal! Detta bestickset innehåller en fullstor gaffel, kniv och sked, allt packat i ett praktiskt förvaringsetui. Perfekt för att ha i ryggsäcken, bilen eller campingväskan utan att behöva oroa dig för smuts. Förvaringsetuiet är tydligt markerat för varje bestick, vilket gör det enkelt att packa ihop igen utan krångel. Tillverkat av livsmedelssäkert Creamid-material, vilket gör det både lätt, slitstarkt och säkert att använda. Egenskaper: Fullstort bestickset – kniv, gaffel och sked Lätt och tåligt Creamid-material Praktiskt förvaringsetui – skyddar mot smuts och håller allt organiserat Tydlig märkning i etuiet – enkelt att packa ihop efter användning Tillverkad i USA Livsmedels- och vattensäkert material Perfekt för camping, friluftsliv, EDC och vardagsbruk – din bästa lunchkompis i alla situationer!
![Ka-Bar Backpack Kaster]()
Ka-Bar Backpack Kaster
378 SEK
The KA-BAR® Backpack Kaster, an American-made, lightweight fishing system designed to tag along on all your outdoor adventures is made from Ultramid® and weighs 0.25 lb. It is comprised of three main components. The handle is inspired by the iconic KA-BAR USMC Fighting/Utility Knife and has a hollow storage compartment for extra line and lures. The head of the Kaster is where your fishing line attaches, and a plastic clamp-like device is included to secure your line in place when not in use. Made in the USA Fishing line and lure not included The KA-BAR® Backpack Kaster holds the following fishing line: 8lbs = 100 yds @.011" dia. 10lbs = 90 yds @.012" dia.
![Ka-Bar USSF Space-Bar Knife]()
Ka-Bar USSF Space-Bar Knife
1795 SEK
Introducing the tried-and-true KA-BAR Fighting/Utility Knife to a post-orbital world dubbed the SPACE-BAR. Made with battle-tested 1095 Cro-Van steel, the blade has a gray powder coating and is marked "USSF" and "KA-BAR". The handle is blue Kraton G and is carried in a gray hard plastic sheath that is MOLLE-compatible. From roaming the stars to defending your own space, the KA-BAR Knives USSF products have universal appeal and will put you light-years ahead of anything you may encounter. Made in Olean, NY, USA, Earth - a straight line distance of just 1403.61 miles (2258.89 km) from the other USA, Earth knife manufacturer, Spyderco Knives. Specifications Blade Length: 7.00" Handle Length: 4.75" Overall Length: 11.75" Blade Material: 1095 Cro-Van Steel Blade Thickness: 0.165" Blade Hardness: 56-58HRC Blade Style: Clip Point Blade Grind: Flat Edge Angle: 20° Blade Finish: Gray Powder Coat Handle Material: Blue Kraton G Sheath Material: Gray Hard Plastic Weight: 10.30 oz. Weight with Sheath: 14.89 oz. Knife Made in the USA Sheath Made in Taiwan
![Ka-Bar Mark I]()
Ka-Bar Mark I
1895 SEK
A remake of the world famous Mark I USN knife, this updated version features epoxy powder coated blades for superb corrosion resistance and a non-reflective surface. Tang stamped USN. Leather sheath included. Made in the USA. Weight 227 gram Steel 1095 Cro-Van Blade length 130mm Overall length 238mm Grind Flat Edge Angles 20 Degrees Handle Material Leather Shape Clip HRC 56-58 Stamp USN Butt Cap/Guard 12GA Commercial Grd Carbon Steel Made in Knife Made in USA, Sheath Made in Mexico Blade Thickness 4.19mm
![Ka-Bar Foliage Green Utility Knife Serrated]()
Ka-Bar Foliage Green Utility Knife Serrated
1895 SEK
U.S. servicemen and civilians alike asked for a foliage green version of the well-known Black KA-BAR - and here it is! A partially serrated edge makes cutting looped and synthetic materials a breeze. Tang stamped USA. MOLLE compatible hard plastic sheath included. Made in the USA. Sheath Made in Taiwan Weight 318 gram Steel 1095 Cro-Van Blade length 17,78 cm Overall length 29,5 cm Blade Thickness 0,41 cm Grind Flat Edge Angles 20 Degrees Handle Material Kraton G® Shape Clip HRC 56-58 Butt Cap/Guard Powdered Metal
![Ka-Bar USMC Straight Edge]()
Ka-Bar USMC Straight Edge
1895 SEK
En sann klassiker. Känd helt enkelt som "The Ka-Bar" och berömd för sin roll som marinkårsoldaternas stridskniv under andra världskriget. 70 år senare är det fortfarande en av de mest formidabla knivarna i sin klass. Tillverkad i USA
![Ka-Bar TDI Law Enforcement Knife]()
Ka-Bar TDI Law Enforcement Knife
995 SEK
Smidig och effektiv kniv med droppspetsblad i rosttrögt AUS-8 och med mattsvart finish. Levereras med formgjuten slida. Designad av John Benner, grundare och ägare av Tactical Defense Institute. Egg Slät Bladprofil Drop Point Bladets längd 57 mm Adv. Blade Material Stainless Steel - AUS 8A Finish Matte Slipning Hålslipad Handtagets längd 76 mm Handtagets material Zytel Hårdhet 57-59 HRC Total längd 140 mm Slida Formgjuten Vikt 90.7 gram
![Ka-Bar Buddy Förvaringslåda]()
Ka-Bar Buddy Förvaringslåda
518 SEK
Ka-Bar Buddy Förvaringslåda Håll din utrustning torr och säker med KA-BAR 9420 Buddy Storage Case! Oavsett om du är ute på äventyr, camping, jakt eller airsoft, är denna slitstarka och vattentäta förvaringslåda din pålitliga följeslagare. Tillverkad i Creamid®, med Glass Filled Nylon (GFN) lås och en gummitätning, erbjuder Buddy-lådan ett pålitligt skydd mot fukt, smuts och stötar. Egenskaper: Tillverkad i Creamid® – hållbart och lätt material Lås i Glass Filled Nylon (GFN) för extra säkerhet Gummitätning för vatten- och dammskydd Robust och stöttålig – perfekt för tuffa miljöer Tillverkad i USA En tålig och pålitlig förvaringslåda för EDC, överlevnad, taktik och friluftsliv – Buddy har din rygg, var du än är!
![Ka-Bar Mark 1 - Kraton]()
Ka-Bar Mark 1 - Kraton
1595 SEK
A remake of the ever-popular and sought-after knife issued to the Department of the Navy during WWII, the Mark I features a non-reflective black blade that is epoxy powder-coated. Tests prove the finish is more durable than ever. The classic oval shape of the original KA-BAR remains and has been modernized with a material nearly impervious to sweat, chemicals, water and wear - Kraton G®. Tang stamped USN. MOLLE compatible hard plastic sheath included. Made in the USA. Weight 227g Blade length 13,02cm Blade Thickness 0,42cm Overall length 23,35cm Steel 1095 Cro-Van HRC 56-58 Grind Flat Shape Clip Handle Material Kraton G®
![Ka-Bar Full Size Foliage Green]()
Ka-Bar Full Size Foliage Green
1895 SEK
U.S. servicemen and civilians alike asked for a foliage green version of the well-known Black KA-BAR - and here it is! Tang stamped USA. MOLLE compatible hard plastic sheath included. Made in the USA. Weight 318 g Steel 1095 Cro-Van Blade length 17.78cm Overall length 29.5cm Blade Thickness 0.41cm Grind Flat Edge Angles 20 Degrees Handle Material Kraton G® Shape Clip HRC 56-58 Butt Cap/Guard Powdered Metal
![Ka-Bar 1269 Fighter]()
Ka-Bar 1269 Fighter
1795 SEK
The popular KA-BAR Fighter now with a straight edge. Featuring an 8" 1095 Cro-Van steel blade. Includes black hard plastic sheath. Made in the US
![Ka-Bar D2 Extreme]()
Ka-Bar D2 Extreme
2995 SEK
Cutting tests prove that D2 is one of the toughest steels used in knife making. Featured here in the classic clip point blade shape that made KA-BAR famous. A partially serrated edge makes cutting looped and synthetic materials a breeze. Tang stamped USA. Hard plastic MOLLE compatible sheath included. Made in the USA. Weight 341 gram Steel D2 Blade length 178mm Overall length 302mm Grind Flat Edge Angles 20 Degrees Handle Material Black Kraton G® Shape Clip HRC 59-60CR Stamp USA Butt Cap/Guard Powdered Metal Made in Knife Made in USA, Sheath Made in Taiwan Blade Thickness 4.44mm
![Ka-Bar TDI/Hinderer Hell Fire]()
Ka-Bar TDI/Hinderer Hell Fire
1995 SEK
The TDI/Hinderer knives are design collaborations between Tactical Defense Institute President and Chief Instructor, John Benner, and custom knife maker, Rick Hinderer, owner of Hinderer Knives. Based on their combined experiences as a veteran police Lieutenant and Fire Fighter/EMT, John Benner and Rick Hinderer have designed knives for real-world emergency situations--sure when gripped and ambidextrous for a multitude of mounting and application options. The Hell Fire features a recurve Tanto blade. Locking hard plastic sheath and reversible black metal belt clip (1480CLIP) included. Fits maximum height of 44.5mm, width of 32mm and thickness of 6.35mm Made in the USA. WEIGHT 159 g BLADE LENGTH 91mm OVERALL LENGTH 184mm EDGE ANGLES 20 Degrees SHAPE Recurve Tanto TANG STAMP KA-BAR/TDI/Hinderer KNIFE MATERIAL 1095 Cro-Van GRIND Hollow HANDLE MATERIAL Ultramid® ROCKWELL HARDNESS 56-58 KNIFE COUNTRY OF ORIGIN United States BLADE THICKNESS 4.77mm BLADE WIDTH 31.75mm
![Ka-Bar TDI Pocket Strike]()
Ka-Bar TDI Pocket Strike
1095 SEK
Behändig och funktionell kniv som är lätt att dölja. TDI Pocket Strike lånar design från den klassiska karambiten med en krökt profil och ring på baksidan som tillsammans med ett format handtag ger ett mycket säkert grepp om kniven. Knivbladet har en svart finish och är tillverkat med rostfritt AUS-8 stål. Levereras med en formgjuten slida i hårdplast med fickspänne.
![Ka-Bar Dog's Head Utility Knife]()
Ka-Bar Dog's Head Utility Knife
1895 SEK
The Dog's Head Utility Knife, a close relative of the USMC Fighting/Utility knife, presents an alternative to those who wish to have the legendary performance of KA-BAR's military knives in a non-military setting. Ideal for bushcraft, camping, and hunting, the Dog's Head Utility knife is a welcome addition to KA-BAR's robust lineup. Sold with brown leather Dog's Head Pirate sheath. Made in USA. Weight 318g Blade length 17,78cm Blade Thickness 0,42cm Overall length 30,48cm Steel 1095 Cro-Van HRC 56-58 Grind Flat Shape Clip Point Handle Material Leather
![Ka-Bar KA-BARLEY Bottle Opener]()
Ka-Bar KA-BARLEY Bottle Opener
218 SEK
Made of GFN-PA66, an extra-durable plastic material, and featuring the traditional KA-BAR® oval-shaped handle, the KA-BARLEY makes light work of prying off bottle caps. Made in the USA.
![Ka-Bar Short Ka-Bar Black]()
Ka-Bar Short Ka-Bar Black
1495 SEK
Practically sized knife with 5.25" blade intended for all utilitarian uses. Tang stamped USA. Hard plastic MOLLE compatible sheath included. Made in the USA
![Ka-Bar Becker Crewman]()
Ka-Bar Becker Crewman
2295 SEK
Ka-Bar Crewman är en rejäl överlevnadskniv för de tuffaste situationerna, tillverkad i 1095 Cro-Van stål och med handtag i zytel. Levereras med ett kraftigt polyesterfodral med ficka fram. Egg Rak Bladprofil Clip Point Bladets längd 14.0 cm Stål 1095 Cro-Van med hög kolhalt Bladfärg Svart Finish Matt Slipning Flatslipat Bladets tjocklek 4.77 mm Handtagets längd 14.0 cm Handtagets material Zytel Handtagets färg Svart Hårdhet 56-58 HRC Total längd 27.9 cm Vikt 340.2 gram
![Ka-Bar Becker TacTool]()
Ka-Bar Becker TacTool
2595 SEK
Ka-Bar Becker TacTool är ett design samarbete mellan Ethan Becker (BK&T) och John Benner (TDI). TacTool är ett verktyg som är byggd för alla typer av jobb. Slag, hugg, skär och bryt den är designad för att klara allt. Levereras med en MOLLE-kompatibel slida. Becker Knives ”Works for a living” Vikt 590 g Bladlängd 178mm Totallängd 318mm Stål 1095 Cro-Van, 56-58 HRC Knivskaft Ultramid® Bladtjocklek 6.35mm Övrig information Kniv med inbyggd avbitare
![Ka-Bar Becker Campanion]()
Ka-Bar Becker Campanion
1995 SEK
For all those who camp, hunt or spend time afield. The Campanion works just as happily splitting out kindling as it does prying apart joints and skinning game, not to mention chopping onions for the campfire chili! Sold with a MOLLE compatible heavy-duty polyester sheath with front pocket. Becker Knives "Work for a living". Made in the USA. WEIGHT 454 g BLADE LENGTH 133mm OVERALL LENGTH 267mm EDGE ANGLES 20 Degrees SHAPE Drop Point TANG STAMP KA-BAR/BK&T KNIFE MATERIAL 1095 Cro-Van GRIND Flat HANDLE MATERIAL Ultramid® ROCKWELL HARDNESS 56-58 COUNTRY OF ORIGIN United States BLADE THICKNESS 6.35mm BLADE WIDTH 41.27mm
![Ka-Bar USMC Full-Size Straight Edge]()
Ka-Bar USMC Full-Size Straight Edge
1995 SEK
The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, 70 years later. Tang stamped USMC. Hard plastic MOLLE compatible sheath included. Made in the USA. Weight 317.5 g Steel 1095 Cro-Van Blade length 17.78cm Overall length 30.16cm Blade Thickness 0.41cm Grind Flat Edge Angles 20 Degrees Handle Material Leather Shape Clip HRC 56-58 Butt Cap/Guard Powdered Metal
![Ka-Bar Modified Tanto]()
Ka-Bar Modified Tanto
1895 SEK
The KA-BAR 1266 Modified Tanto is a new take on a classic blade design. Made with our famous 1095 Cro-Van steel. The 1266 has a Kraton G handle, a synthetic material that holds up in the elements. The Modified Tanto comes with a rugged glass-filled nylon sheath. Made in USA
![Ka-Bar Vietnam USMC]()
Ka-Bar Vietnam USMC
1995 SEK
This knife has been laser engraved with carefully designed blade art meant to honor our Veterans of the Vietnam War. Tang stamped USMC. Leather sheath included. Made in the USA. Weight 318 g Steel 1095 Cro-Van Blade length 178mm Overall length 302mm Grind Flat Edge Angles 20 Degrees Handle Material Leather Shape Clip HRC 56-58 Stamp USMC Butt Cap/Guard 12GA Commercial Grd Carbon Steel Made in Knife Made in USA, Sheath Made in Mexico Blade Thickness 4.19mm
![Ka-Bar Slabby]()
Ka-Bar Slabby
2895 SEK
Slabby - Overbuilt. Garish. A hand tank Those are just some of the descriptive words used to describe the KA-BAR Slabby, a full tang, slab handled KA-BAR. The Slabby is manufactured in the USA with tried and true 1095 Cro-Van. The sheath of the Slabby is made in the USA with two locks to ensure retention.
![Ka-Bar TDI LDK]()
Ka-Bar TDI LDK
458 SEK
With an overall profile about the size of a credit card, this knife can be concealed just about anywhere. Pin it under a tactical vest strap, carry it in your wallet or lash it down with your boot laces. This backup knife is intended to be readily available as your "Last Ditch" attempt at defense when all other weapons have been removed. Sold with a hard plastic friction sheath and black cord. Edge Plain Blade Length 3.8cm Handle Length 5.1cm Overall Length 8.9cm Weight 68.0 grams Blade Material Stainless Steel - 9CR18 Handle Material Stainless Steel Sheath Type Molded Plastic
![Ka-Bar Tanto]()
Ka-Bar Tanto
1895 SEK
The Tanto blade shape, of Asian influence, has a thick pointed blade that's good for penetration. Coupled with a glass-filled nylon sheath this knife is designed for the toughest of tasks. Tang stamped USA. Hard plastic MOLLE compatible sheath included. Made in the USA. WEIGHT: 318 g BLADE LENGTH: 203mm OVERALL LENGTH: 325mm EDGE ANGLES: 20 Degrees SHAPE: Tanto TANG STAMP: USA NSN: 1095-01-587-8654 KNIFE-COMBAT KNIFE MATERIAL: 1095 Cro-Van GRIND: Hollow HANDLE MATERIAL: Kraton G® ROCKWELL HARDNESS: 56-58 BUTT CAP/GUARD: 12GA Commercial Grd Carbon Steel KNIFE COUNTRY OF ORIGIN: United States BLADE THICKNESS: 4.19mm BLADE WIDTH: 30.17mm
Ka-Bar Dessert Destroyer Ice Cream Scoop
378 SEK
Ge dessertserveringen en taktisk känsla med den här glasskopan från KA-BAR med handtag inspirerat av KA-BARs klassiska stridskniv. Fungerar även utmärkt för melon och annan dessertfrukt. Kan diskas i diskmaskin.
Ka-Bar Kortlek
178 SEK
Whittle away the hours playing cards with your new favorite deck from KA-BAR. 2018 marks our 120th Anniversary and we've adorned these textured cards with a special logo that commemorates the big event. Face cards are custom-designed with old-timey characters imagined from earlier times, including the wiley bear and the fierce hunter from which we derived our name. Made in the USA.
Ka-Bar Belt Clip
248 SEK
Reversible black metal belt clip fits most TDI and TDI/Hinderer fixed-blade knives. Sold with fasteners for mounting. The belt clip also fits the Becker Necker BK11 and the Becker/ESEE ESKABAR BK14. Does not fit the TDI 1493, 1494, 1480SF, 1478BP, and 2491 Fits maximum belt height of 4,44 cm, width of 3,17 cm and thickness of 0,63 cm Use T6 Torx Wrench to change fasteners
Ka-Bar Tactical Spork/Kniv (Färg: Svart)
218 SEK
The Tactical Spork, which is made from food and water approved Grilamid, is equipped with a fork/spoon combo and has a 64mm plastic serrated knife in the handle. The knife is accessed by pulling the spork in opposite directions from each extreme end. Hint--avoid gripping the flat panel area in the middle of the Spork--this is actually part of its lock. The tighter you hold here, the more difficult it will be for you to pull out the knife! The Tactical Spork is 175mm overall and has a blade length of 64mm. It weighs 46 g. Made in the USA.
Ka-Bar Tactical Spork/Kniv (Färg: Grön)
218 SEK
The Tactical Spork, which is made from food and water approved Grilamid, is equipped with a fork/spoon combo and has a 64mm plastic serrated knife in the handle. The knife is accessed by pulling the spork in opposite directions from each extreme end. Hint--avoid gripping the flat panel area in the middle of the Spork--this is actually part of its lock. The tighter you hold here, the more difficult it will be for you to pull out the knife! The Tactical Spork is 175mm overall and has a blade length of 64mm. It weighs 46 g. Made in the USA.
Ka-Bar Visselpipa 2st
218 SEK
Visselpipa från Ka-Bar som ljuder i 100dB. Levereras i 2-pack Tillverkad av säker Creamid Tillverkad i USA
Ka-Bar Krunch Spoon/Straw
188 SEK
Ka-Bar Krunch Spoon/Straw är det ultimata verktyget för att äta soppa eller liknande. Förutom att aggera som sked så är Ka-Bar Krunch Spoon/Straw designad för att fungera som ett sugrör. Består av giftfri Creamid Klarar maskindisk Tillverad i USA
Ka-Bar Short Brown Leather Sheath
458 SEK
Leather sheath that fits KA-BARS with 133.35mm blade and double guard. Sheath is marked "KA-BAR"
Ka-Bar Ek Commando Presentation Knife
4495 SEK
This beauty is decked out and ready to be put on display. A mirror polished stainless steel blade and lacquered walnut* handle scales make this knife a real head turner. But don't be fooled - this pretty lady is ready to dive into work as well! *Walnut is a natural material and there will be variation in grain and color of the handle scales used to make the EK13 Presentation Knives. Made in the USA. Sold with an American made leather sheath. WEIGHT 250 g BLADE LENGTH 168mm OVERALL LENGTH 321mm EDGE ANGLES 20 Degrees SHAPE Double-edged Spear Point TANG STAMP KA-BAR/Ek Commando Knife Co KNIFE MATERIAL 440C Stainless Steel GRIND Flat HANDLE MATERIAL Walnut ROCKWELL HARDNESS 55-58 BUTT CAP/GUARD Copper Coated Stainless Steel KNIFE COUNTRY OF ORIGIN United States SHEATH COUNTRY OF ORIGIN United States BLADE THICKNESS 3.91mm BLADE WIDTH 23.82mm
Ka-Bar TDI Flipper Folder
1245 SEK
Ka-Bar TDI Flipper Folder En taktisk och mångsidig fällkniv, perfekt för EDC (Everyday Carry). Ka-Bar TDI Flipper Folder är tillbaka, bättre än någonsin, och kombinerar snabb enhandsöppning, robust konstruktion och en taktisk design. Den 3-tums bladet i AUS 8A rostfritt stål har en Spear Point-form, vilket ger en balans mellan styrka och precision. Med Crossbar-låsning för extra säkerhet och en ambidextrös design med reversibelt fickclip, passar den både höger- och vänsterhänta användare. Egenskaper: AUS 8A-blad – slitstarkt, korrosionsbeständigt och lätt att slipa Spear Point-bladdesign – utmärkt balans mellan styrka och precision Crossbar-lås – säker och stabil låsning Snabb flipper-öppning för enhandsanvändning Ergonomiskt GFN-handtag (Glass Filled Nylon) – lätt men extremt tåligt Tip-up bärstil med reversibelt fickclip – passar både höger- och vänsterhänta Lätt och kompakt – perfekt för dagligt bruk En slitstark och taktisk fällkniv, perfekt för EDC, självförsvar och taktisk användning – liten i storlek, stor i prestanda!
Ka-Bar Skeleton Knife
298 SEK
The KA-BAR Skeleton Knife is a no-nonsense, lightweight knife that can be worn as a neck knife or in a pocket or pack. Made of stainless steel, the KA-BAR Skeleton is 156mm long and features a 64mm blade. Comes with a hard plastic sheath and KA-BAR's limited lifetime warranty. Fits perfectly in CRKT Mossback if you want to add a leather sheath. Weight 46 gram Steel 5Cr15 SS Blade length 64mm Overall length 156mm Grind Hollow Edge Angles 18 Degrees Handle Material 5Cr15 SS Shape Clip HRC 57-59 Stamp KA-BAR Made in China Blade Thickness 3.17mm
Ka-Bar Lunch Pal
258 SEK
Ka-Bar Lunch Pal Ät var du vill och när du vill med Ka-Bar Lunch Pal! Detta bestickset innehåller en fullstor gaffel, kniv och sked, allt packat i ett praktiskt förvaringsetui. Perfekt för att ha i ryggsäcken, bilen eller campingväskan utan att behöva oroa dig för smuts. Förvaringsetuiet är tydligt markerat för varje bestick, vilket gör det enkelt att packa ihop igen utan krångel. Tillverkat av livsmedelssäkert Creamid-material, vilket gör det både lätt, slitstarkt och säkert att använda. Egenskaper: Fullstort bestickset – kniv, gaffel och sked Lätt och tåligt Creamid-material Praktiskt förvaringsetui – skyddar mot smuts och håller allt organiserat Tydlig märkning i etuiet – enkelt att packa ihop efter användning Tillverkad i USA Livsmedels- och vattensäkert material Perfekt för camping, friluftsliv, EDC och vardagsbruk – din bästa lunchkompis i alla situationer!
Ka-Bar Backpack Kaster
378 SEK
The KA-BAR® Backpack Kaster, an American-made, lightweight fishing system designed to tag along on all your outdoor adventures is made from Ultramid® and weighs 0.25 lb. It is comprised of three main components. The handle is inspired by the iconic KA-BAR USMC Fighting/Utility Knife and has a hollow storage compartment for extra line and lures. The head of the Kaster is where your fishing line attaches, and a plastic clamp-like device is included to secure your line in place when not in use. Made in the USA Fishing line and lure not included The KA-BAR® Backpack Kaster holds the following fishing line: 8lbs = 100 yds @.011" dia. 10lbs = 90 yds @.012" dia.
Ka-Bar USSF Space-Bar Knife
1795 SEK
Introducing the tried-and-true KA-BAR Fighting/Utility Knife to a post-orbital world dubbed the SPACE-BAR. Made with battle-tested 1095 Cro-Van steel, the blade has a gray powder coating and is marked "USSF" and "KA-BAR". The handle is blue Kraton G and is carried in a gray hard plastic sheath that is MOLLE-compatible. From roaming the stars to defending your own space, the KA-BAR Knives USSF products have universal appeal and will put you light-years ahead of anything you may encounter. Made in Olean, NY, USA, Earth - a straight line distance of just 1403.61 miles (2258.89 km) from the other USA, Earth knife manufacturer, Spyderco Knives. Specifications Blade Length: 7.00" Handle Length: 4.75" Overall Length: 11.75" Blade Material: 1095 Cro-Van Steel Blade Thickness: 0.165" Blade Hardness: 56-58HRC Blade Style: Clip Point Blade Grind: Flat Edge Angle: 20° Blade Finish: Gray Powder Coat Handle Material: Blue Kraton G Sheath Material: Gray Hard Plastic Weight: 10.30 oz. Weight with Sheath: 14.89 oz. Knife Made in the USA Sheath Made in Taiwan
Ka-Bar Mark I
1895 SEK
A remake of the world famous Mark I USN knife, this updated version features epoxy powder coated blades for superb corrosion resistance and a non-reflective surface. Tang stamped USN. Leather sheath included. Made in the USA. Weight 227 gram Steel 1095 Cro-Van Blade length 130mm Overall length 238mm Grind Flat Edge Angles 20 Degrees Handle Material Leather Shape Clip HRC 56-58 Stamp USN Butt Cap/Guard 12GA Commercial Grd Carbon Steel Made in Knife Made in USA, Sheath Made in Mexico Blade Thickness 4.19mm
Ka-Bar Foliage Green Utility Knife Serrated
1895 SEK
U.S. servicemen and civilians alike asked for a foliage green version of the well-known Black KA-BAR - and here it is! A partially serrated edge makes cutting looped and synthetic materials a breeze. Tang stamped USA. MOLLE compatible hard plastic sheath included. Made in the USA. Sheath Made in Taiwan Weight 318 gram Steel 1095 Cro-Van Blade length 17,78 cm Overall length 29,5 cm Blade Thickness 0,41 cm Grind Flat Edge Angles 20 Degrees Handle Material Kraton G® Shape Clip HRC 56-58 Butt Cap/Guard Powdered Metal
Ka-Bar USMC Straight Edge
1895 SEK
En sann klassiker. Känd helt enkelt som "The Ka-Bar" och berömd för sin roll som marinkårsoldaternas stridskniv under andra världskriget. 70 år senare är det fortfarande en av de mest formidabla knivarna i sin klass. Tillverkad i USA
Ka-Bar TDI Law Enforcement Knife
995 SEK
Smidig och effektiv kniv med droppspetsblad i rosttrögt AUS-8 och med mattsvart finish. Levereras med formgjuten slida. Designad av John Benner, grundare och ägare av Tactical Defense Institute. Egg Slät Bladprofil Drop Point Bladets längd 57 mm Adv. Blade Material Stainless Steel - AUS 8A Finish Matte Slipning Hålslipad Handtagets längd 76 mm Handtagets material Zytel Hårdhet 57-59 HRC Total längd 140 mm Slida Formgjuten Vikt 90.7 gram
Ka-Bar Dozier Folding Hunter - Blaze Orange
695 SEK
Award-winning lock back designed by Bob Dozier is an affordable, practical all-purpose knife appropriate for daily tasks. Features a reversible pocket clip and thumb stud.
Ka-Bar Buddy Förvaringslåda
518 SEK
Ka-Bar Buddy Förvaringslåda Håll din utrustning torr och säker med KA-BAR 9420 Buddy Storage Case! Oavsett om du är ute på äventyr, camping, jakt eller airsoft, är denna slitstarka och vattentäta förvaringslåda din pålitliga följeslagare. Tillverkad i Creamid®, med Glass Filled Nylon (GFN) lås och en gummitätning, erbjuder Buddy-lådan ett pålitligt skydd mot fukt, smuts och stötar. Egenskaper: Tillverkad i Creamid® – hållbart och lätt material Lås i Glass Filled Nylon (GFN) för extra säkerhet Gummitätning för vatten- och dammskydd Robust och stöttålig – perfekt för tuffa miljöer Tillverkad i USA En tålig och pålitlig förvaringslåda för EDC, överlevnad, taktik och friluftsliv – Buddy har din rygg, var du än är!
Ka-Bar Mark 1 - Kraton
1595 SEK
A remake of the ever-popular and sought-after knife issued to the Department of the Navy during WWII, the Mark I features a non-reflective black blade that is epoxy powder-coated. Tests prove the finish is more durable than ever. The classic oval shape of the original KA-BAR remains and has been modernized with a material nearly impervious to sweat, chemicals, water and wear - Kraton G®. Tang stamped USN. MOLLE compatible hard plastic sheath included. Made in the USA. Weight 227g Blade length 13,02cm Blade Thickness 0,42cm Overall length 23,35cm Steel 1095 Cro-Van HRC 56-58 Grind Flat Shape Clip Handle Material Kraton G®
Ka-Bar Full Size Foliage Green
1895 SEK
U.S. servicemen and civilians alike asked for a foliage green version of the well-known Black KA-BAR - and here it is! Tang stamped USA. MOLLE compatible hard plastic sheath included. Made in the USA. Weight 318 g Steel 1095 Cro-Van Blade length 17.78cm Overall length 29.5cm Blade Thickness 0.41cm Grind Flat Edge Angles 20 Degrees Handle Material Kraton G® Shape Clip HRC 56-58 Butt Cap/Guard Powdered Metal
Ka-Bar 1269 Fighter
1795 SEK
The popular KA-BAR Fighter now with a straight edge. Featuring an 8" 1095 Cro-Van steel blade. Includes black hard plastic sheath. Made in the US
Ka-Bar D2 Extreme
2995 SEK
Cutting tests prove that D2 is one of the toughest steels used in knife making. Featured here in the classic clip point blade shape that made KA-BAR famous. A partially serrated edge makes cutting looped and synthetic materials a breeze. Tang stamped USA. Hard plastic MOLLE compatible sheath included. Made in the USA. Weight 341 gram Steel D2 Blade length 178mm Overall length 302mm Grind Flat Edge Angles 20 Degrees Handle Material Black Kraton G® Shape Clip HRC 59-60CR Stamp USA Butt Cap/Guard Powdered Metal Made in Knife Made in USA, Sheath Made in Taiwan Blade Thickness 4.44mm
Ka-Bar TDI/Hinderer Hell Fire
1995 SEK
The TDI/Hinderer knives are design collaborations between Tactical Defense Institute President and Chief Instructor, John Benner, and custom knife maker, Rick Hinderer, owner of Hinderer Knives. Based on their combined experiences as a veteran police Lieutenant and Fire Fighter/EMT, John Benner and Rick Hinderer have designed knives for real-world emergency situations--sure when gripped and ambidextrous for a multitude of mounting and application options. The Hell Fire features a recurve Tanto blade. Locking hard plastic sheath and reversible black metal belt clip (1480CLIP) included. Fits maximum height of 44.5mm, width of 32mm and thickness of 6.35mm Made in the USA. WEIGHT 159 g BLADE LENGTH 91mm OVERALL LENGTH 184mm EDGE ANGLES 20 Degrees SHAPE Recurve Tanto TANG STAMP KA-BAR/TDI/Hinderer KNIFE MATERIAL 1095 Cro-Van GRIND Hollow HANDLE MATERIAL Ultramid® ROCKWELL HARDNESS 56-58 KNIFE COUNTRY OF ORIGIN United States BLADE THICKNESS 4.77mm BLADE WIDTH 31.75mm
Ka-Bar TDI Pocket Strike
1095 SEK
Behändig och funktionell kniv som är lätt att dölja. TDI Pocket Strike lånar design från den klassiska karambiten med en krökt profil och ring på baksidan som tillsammans med ett format handtag ger ett mycket säkert grepp om kniven. Knivbladet har en svart finish och är tillverkat med rostfritt AUS-8 stål. Levereras med en formgjuten slida i hårdplast med fickspänne.
Ka-Bar Dog's Head Utility Knife
1895 SEK
The Dog's Head Utility Knife, a close relative of the USMC Fighting/Utility knife, presents an alternative to those who wish to have the legendary performance of KA-BAR's military knives in a non-military setting. Ideal for bushcraft, camping, and hunting, the Dog's Head Utility knife is a welcome addition to KA-BAR's robust lineup. Sold with brown leather Dog's Head Pirate sheath. Made in USA. Weight 318g Blade length 17,78cm Blade Thickness 0,42cm Overall length 30,48cm Steel 1095 Cro-Van HRC 56-58 Grind Flat Shape Clip Point Handle Material Leather
Ka-Bar KA-BARLEY Bottle Opener
218 SEK
Made of GFN-PA66, an extra-durable plastic material, and featuring the traditional KA-BAR® oval-shaped handle, the KA-BARLEY makes light work of prying off bottle caps. Made in the USA.
Ka-Bar Short Ka-Bar Black
1495 SEK
Practically sized knife with 5.25" blade intended for all utilitarian uses. Tang stamped USA. Hard plastic MOLLE compatible sheath included. Made in the USA
Ka-Bar Becker Crewman
2295 SEK
Ka-Bar Crewman är en rejäl överlevnadskniv för de tuffaste situationerna, tillverkad i 1095 Cro-Van stål och med handtag i zytel. Levereras med ett kraftigt polyesterfodral med ficka fram. Egg Rak Bladprofil Clip Point Bladets längd 14.0 cm Stål 1095 Cro-Van med hög kolhalt Bladfärg Svart Finish Matt Slipning Flatslipat Bladets tjocklek 4.77 mm Handtagets längd 14.0 cm Handtagets material Zytel Handtagets färg Svart Hårdhet 56-58 HRC Total längd 27.9 cm Vikt 340.2 gram
Ka-Bar Becker TacTool
2595 SEK
Ka-Bar Becker TacTool är ett design samarbete mellan Ethan Becker (BK&T) och John Benner (TDI). TacTool är ett verktyg som är byggd för alla typer av jobb. Slag, hugg, skär och bryt den är designad för att klara allt. Levereras med en MOLLE-kompatibel slida. Becker Knives ”Works for a living” Vikt 590 g Bladlängd 178mm Totallängd 318mm Stål 1095 Cro-Van, 56-58 HRC Knivskaft Ultramid® Bladtjocklek 6.35mm Övrig information Kniv med inbyggd avbitare
Ka-Bar Becker Campanion
1995 SEK
For all those who camp, hunt or spend time afield. The Campanion works just as happily splitting out kindling as it does prying apart joints and skinning game, not to mention chopping onions for the campfire chili! Sold with a MOLLE compatible heavy-duty polyester sheath with front pocket. Becker Knives "Work for a living". Made in the USA. WEIGHT 454 g BLADE LENGTH 133mm OVERALL LENGTH 267mm EDGE ANGLES 20 Degrees SHAPE Drop Point TANG STAMP KA-BAR/BK&T KNIFE MATERIAL 1095 Cro-Van GRIND Flat HANDLE MATERIAL Ultramid® ROCKWELL HARDNESS 56-58 COUNTRY OF ORIGIN United States BLADE THICKNESS 6.35mm BLADE WIDTH 41.27mm
Ka-Bar USMC Full-Size Straight Edge
1995 SEK
The most famous fixed blade knife in the World - "the KA-BAR" - was designed to serve our troops during World War II and is still doing its job, with honors, 70 years later. Tang stamped USMC. Hard plastic MOLLE compatible sheath included. Made in the USA. Weight 317.5 g Steel 1095 Cro-Van Blade length 17.78cm Overall length 30.16cm Blade Thickness 0.41cm Grind Flat Edge Angles 20 Degrees Handle Material Leather Shape Clip HRC 56-58 Butt Cap/Guard Powdered Metal
Ka-Bar Modified Tanto
1895 SEK
The KA-BAR 1266 Modified Tanto is a new take on a classic blade design. Made with our famous 1095 Cro-Van steel. The 1266 has a Kraton G handle, a synthetic material that holds up in the elements. The Modified Tanto comes with a rugged glass-filled nylon sheath. Made in USA
Ka-Bar Vietnam USMC
1995 SEK
This knife has been laser engraved with carefully designed blade art meant to honor our Veterans of the Vietnam War. Tang stamped USMC. Leather sheath included. Made in the USA. Weight 318 g Steel 1095 Cro-Van Blade length 178mm Overall length 302mm Grind Flat Edge Angles 20 Degrees Handle Material Leather Shape Clip HRC 56-58 Stamp USMC Butt Cap/Guard 12GA Commercial Grd Carbon Steel Made in Knife Made in USA, Sheath Made in Mexico Blade Thickness 4.19mm
Ka-Bar Slabby
2895 SEK
Slabby - Overbuilt. Garish. A hand tank Those are just some of the descriptive words used to describe the KA-BAR Slabby, a full tang, slab handled KA-BAR. The Slabby is manufactured in the USA with tried and true 1095 Cro-Van. The sheath of the Slabby is made in the USA with two locks to ensure retention.
Ka-Bar TDI LDK
458 SEK
With an overall profile about the size of a credit card, this knife can be concealed just about anywhere. Pin it under a tactical vest strap, carry it in your wallet or lash it down with your boot laces. This backup knife is intended to be readily available as your "Last Ditch" attempt at defense when all other weapons have been removed. Sold with a hard plastic friction sheath and black cord. Edge Plain Blade Length 3.8cm Handle Length 5.1cm Overall Length 8.9cm Weight 68.0 grams Blade Material Stainless Steel - 9CR18 Handle Material Stainless Steel Sheath Type Molded Plastic
Ka-Bar Tanto
1895 SEK
The Tanto blade shape, of Asian influence, has a thick pointed blade that's good for penetration. Coupled with a glass-filled nylon sheath this knife is designed for the toughest of tasks. Tang stamped USA. Hard plastic MOLLE compatible sheath included. Made in the USA. WEIGHT: 318 g BLADE LENGTH: 203mm OVERALL LENGTH: 325mm EDGE ANGLES: 20 Degrees SHAPE: Tanto TANG STAMP: USA NSN: 1095-01-587-8654 KNIFE-COMBAT KNIFE MATERIAL: 1095 Cro-Van GRIND: Hollow HANDLE MATERIAL: Kraton G® ROCKWELL HARDNESS: 56-58 BUTT CAP/GUARD: 12GA Commercial Grd Carbon Steel KNIFE COUNTRY OF ORIGIN: United States BLADE THICKNESS: 4.19mm BLADE WIDTH: 30.17mm